Step 10

Strut 10 goes	Vertice	X	Y	Z
from	2	-16.125	-16.125	22.804
to	3	16.125	-16.125	22.804

Step 10 Audio
Step 10 3-D model (dxf format)
Step 10: Locate strut s10 and place it between node n6 and node n7. Tighten into node n6 about ten revolutions and then into node n7 about ten revolutions. Go back and tighten each screw 100% making sure one screw is not turning while you are tightening the other.